EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
Подробная информация о продукции
Место происхождения: Китай
Фирменное наименование: Anjeka
Сертификация: ISO9001-2015
Номер модели: Анжека5680А
Условия оплаты и доставки
Количество мин заказа: 25 кг/барабан
Упаковывая детали: 25 кг/барабан, 180 кг/барабан
Время доставки: 3-5 дней
Условия оплаты: Л/К, Т/Т, западное соединение
Поставка способности: 100 тонн/месяц
Появление: |
Просвечивающая жидкость |
Точка кипения: |
> 100°C |
Плотность: |
00,98 - 1,02 г/см3 |
Точка возгорания: |
> 100°C |
Вязкость: |
1,399-1,409 (25°С) |
Нелетучий состав: |
99% |
Индекс преломления: |
1,399-1,409 (25°С) |
Температура хранения: |
>5°С |
Появление: |
Просвечивающая жидкость |
Точка кипения: |
> 100°C |
Плотность: |
00,98 - 1,02 г/см3 |
Точка возгорания: |
> 100°C |
Вязкость: |
1,399-1,409 (25°С) |
Нелетучий состав: |
99% |
Индекс преломления: |
1,399-1,409 (25°С) |
Температура хранения: |
>5°С |
Anjeka 5680A is a foam inhibitor and defoamer for high solids, high film thickness epoxy floor coatings and screen inks and UV light curing coatings.
Chemical composition: polysiloxane compound containing hydrophobic particles.
The figures given on this data page are typical values and are not technical indicate of the product.
| Appearance | Translucent liquid |
| Density g/cm³ (23°C) | 0.98 - 1.02 |
| Involatile composition %. | 99 |
| Refractive index | 1.399-1.409 ( 25°C) |
Delamination may occur at temperatures below 5 °C. Hence heat to 20 °C and mix thoroughly before use.
Storage time of more than 12 months is not recommended.
The full effect of defoamer can only be obtained 24 hours after it is put into the system.
Industrial coatings
Features and Benefits.
Anjeka5680A is an excellent foam inhibitor and defoamer, which has good inhibition and elimination effect on foam generated during the manufacturing and construction of high solid and solvent-free epoxy floor coatings. And also, it has a good inhibiting effect on foam of high viscosity, high film thickness, and especially for solvent-free high film thickness epoxy floor coating.
Additives & Instruments
Epoxy floor coatings, screen inks, UV inks.
0.01 - 1.0%Additive dosage (in purchased form) based on total formulation.
The above figures are empirical and the optimum dosage should be determined through a series of experiments.
The product added before grinding or mixing has the best foam inhibition effect. And it can also be added after grinding, but it must be stirred evenly.
![]()
![]()
![]()
![]()
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
![]()