Выделить:
Химический состав: |
Полимерная смесь пеногасителей, не содержащая силикона. |
появление: |
Бесцветный, прозрачный или слегка желтоватый. |
Активный ингредиент (%): |
100 |
Срок годности: |
24 месяца |
Условия хранения: |
Хранить в прохладном, сухом месте |
Плотность g/cm3 (23°C):: |
0,85-1,05 |
Точка плавления:: |
Соответствующие данные отсутствуют |
Название продукта: |
без силиконовых добавок-пеногасителей |
Эквивалентный продукт: |
Бк 055 |
Anjeka-5055 defoamer additive no silicone DESCRIPTION:
Anjeka-5055 is a defoaming agent derived from polymers and does not contain organic silicon. Its main purpose is to be utilized in unsaturated polyester resin systems, along with both solvent-based and solvent-free systems.
PRODUCT DATA:
Chemical Composition:
Mixture of non-organic silicon defoaming polymer
Note: The values provided on this data sheet are typical and not technical specifications of the product.
| Density g/cm³ (23℃): |
0.85-1.05 |
| Appearance and Properties: |
Colorless transparent to slightly yellow liquid |
| Flash Point ℃: |
no data available |
| Solvent: |
none |
| Non-volatile Content %: |
100 |
STORAGE and TRANSPORT:
Cure at room temperature. Storage time is not recommended to exceed 12 months.
APPLICATION SECTORS:
Unsaturated polyester resin
Solvent-based systems
Solvent-free systems
Highly recommended
PERFORMANCE:
Anjeka5055 is a VOC-free product with performance comparable to traditional defoaming agents.
RECOMMENDED LEVELS:
0.3-1.0% additive levels (as purchased) based on the total formulation. The above values are empirical; optimal levels should be determined through a series of experiments.
PROCESSING INSTRUCTIONS:
The additive can be added at any stage of the production process, either during or after. It is recommended to add the product in the early stages of resin production.
COATING INDUSTRY:
RECOMMENDED LEVELS:
0.3-1.0% additive levels (as purchased) based on the total formulation. The above values are empirical; optimal levels should be determined through a series of experiments.
PROCESSING INSTRUCTIONS:
The additive can be added at any stage of the production process, either during or after.
PACKAGING:
25kg iron drum
180kg plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Ваше сообщение должно содержать от 20 до 3000 символов!
