Выделить:
Появление: |
Прозрачная желтая жидкость |
Приложение: |
Промышленные покрытия, автомобильные покрытия, архитектурные покрытия и печатные краски |
Химический состав:: |
Раствор блок-сополимера, содержащего группы, благоприятные для пигментов. |
Совместимость: |
имеет хорошую совместимость с алкидными смолами, целлюлозой, хлоркаучуком, эпоксидной смолой, полиур |
Плотность г/см³ (23℃): |
0,80-1,00 |
Активный ингредиент: |
100% |
Вязкость, сП (25 ℃): |
5-250 |
Аминное число (мг КОН/г): |
1-15 |
Хранилище: |
В сухом и прохладном месте, |
Значение кислоты (мг KOH/г): |
1-15 |
Растворитель: |
Ксилол |
GENERAL DESCRIPTION
Anjeka-6062 is suitable for solvent-based and solvent-free systems, has excellent dispersing performance and wide compatibility with various systems, and is highly recommended for general-purpose thickener dispersion.
PRODUCT INFORMATION
| Chemical composition: |
Solution of block copolymer containing pigment-friendly groups. |
| Acid value (mg KOH/g) |
1-15 |
| Amine value (mg KOH/g) |
1-15 |
| Density g/cm³ (23℃) |
0.80-1.00 |
| Viscosity cps (25℃) |
5-250 |
| Active ingredient (%) |
40 |
| Solvent |
Xylene |
STORAGE AND TRANSPORT
It should be stored in a cool and dry place. Mix thoroughly before use, delamination or turbidity may occur at temperatures below 0°C. Heat to 20°C and mix thoroughly.
Storage time is not recommended to exceed 12 months.
APPLICATION MESSAGE
Industrial Coatings
Features and Benefits:
This additive causes pigment deflocculation by spatial site resistance. Due to the small particle size of the deflocculated pigments, a high gloss can be achieved, as well as an increase in color strength. In addition, the transparency of transparent pigments and the hiding power of opaque pigments are improved, the flow properties are improved due to the reduction of viscosity, and the pigment content of the color paste is increased.
APPLICATION SECTORS
Anjeka-6062 has good compatibility with alkyd resins, cellulose, chlorinated rubber, epoxy, polyurethane, polyester, and acrylate, and is especially suitable for high solids systems due to its high solids content.
Industrial Coatings ●
Automotive Coatings ●
Architectural Coatings
Printing inks
●--Special recommendation; ○--Recommendation
RECOMMENDED LEVELS
The following additions are based on the ratio of dispersant solids to pigment volume:
Inorganic pigments: 5%-10%
Titanium dioxide: 1%-3%
Organic pigments: 10%-35
Carbon black: 15%-75
The above data are empirical, the optimal amount should be determined through a series of tests.
INCORPORATION and PROCESSING INSTRUCTIONS
For optimum performance, add the pigment before it is added at the milling stage.
PACKING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service:
- Respond to inquiries within 24 hours.
- Superior quality products at competitive prices.
- Strong R&D and technical support.
- Dedicated professional team service.
- Flexible customized production for various packaging options.
- On-time delivery with no delays.
Our team:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Our Certifcate&Patents:
Ваше сообщение должно содержать от 20 до 3000 символов!
