Выделить:
DESCRIPTION
Anjeka-5062 is a defoamer for water-based coatings. It can be used in color paint formulations and has good compatibility with pure C emulsion systems, phenyl C emulsion systems, PU dispersions, hybrid systems, resins and other water dilutable systems.
PRODUCTION DETAILS:
Composition: An emulsion of polyether siloxane with hydrophobic particles.
The values given in this data sheet describe the typical properties and do not constitute specification limits.
| Appearance: |
translucent liquid |
| Active matter content: |
100% |
Density g/cm³ (23°C) 0.90-1.10
Active ingredient (%) 100
STORAGE AND TRANSPORTATION
Separation and turbidity may occur at temperatures below 5 ℃. Warm to 20 ℃ and mix well before use.
ATTENTION
The full effect of defomer will be obtained after 24 hours.
APPLICATIONS
Industrial Coatings
Characteristics and Advantages:
Anjeka 5062, renowned for its remarkable antifoaming and defoaming qualities, is specifically applied in aqueous systems. It effectively addresses the concern of shrinkage, particularly in the context of waterborne epoxy flooring.
RECOMMENDED USE
Waterborne industrial coatings, screen inks, UV inks.
RECOMMENDED ADDITION LEVEL
0.1%-1.0% additive (as supplied) based upon total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of experiments.
PROCESSING INSTRUCTIONS
For best performance, the additive should be added before grinding. It can also be added later, but it must be stirred evenly.
PACKING
25KG iron drum
180KG plastic drum
Our service:
| 1 |
Custom Solutions |
Tailored additive solutions for your specific coating/ink system. |
| 2 |
Problem Solving |
Expert in fixing floating, pinholes, settling, leveling issues. |
| 3 |
Performance Boost |
Enhances stability, gloss, durability for competitive edge. |
| 4 |
Cost Efficiency |
Optimizes dosage and process to reduce total costs. |
| 5 |
Full Support |
End-to-end technical partnership from lab to production. |
Our team:
Our company:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Our Certifcate&Patents
Ваше сообщение должно содержать от 20 до 3000 символов!
