Выделить:
Anjeka 6710 anti-settling paint additive
, acid-functional copolymer paint additive
, anti-settling agent for inorganic fillers
Появление: |
Светло -желтая жидкость |
Температура автонегвания: |
Нет в наличии |
Плотность г/см³ (23℃): |
0.96-1.06 |
Действующее вещество (%):: |
100 |
Значение кислоты (мг KOH/г): |
330-380 |
Вязкость, сП (25 ℃):: |
100-300 |
Продолжительность хранения: |
12 месяцев |
Химический состав: |
Сополимер с кислотными группами |
General Description:
Anjeka-6710 is a copolymer solution containing acidic groups, mainly used in solvent-borne coatings and ink systems, with excellent wetting and dispersing properties for inorganic fillers and effective anti-settling propertie
Product Data:
Chemical composition: Copolymer with acidic groups
The data provided on this sheet are typical values and not technical specifications.
| Appearance: |
Light yellow liquid
|
| Acid Value (mgKOH/g): |
330-380
|
| Density (g/cm³ at 23℃): |
0.96-1.06
|
| Viscosity (cps at 25℃): |
100-300 |
| Non-Volatile Content (%): |
98 |
| Solvent: |
none |
Storage and Transport:
Please stir well before use, when the temperature is lower than 0 ℃ may occur layering or muddy oil, heat to 30 ℃ -40 ℃ and stir well.
Storage time is not recommended to exceed 12 months.
Special Notes:
Due to the high acid value of the product, it may catalyze the cross-linking of the baking paint system, it should be checked that the viscosity rises during the storage of the coating system; it may reduce the drying speed of the coating in the PE system, the amount of additive should be determined according to the actual experimental situation.
Application Guidelines:
Coating industry and printing ink
Characteristics and advantages:
This additive is designed for high filler filled systems and effectively improves
anti-settling performance and can opening effect.
Application Sectors:
This additive is recommended for solvent-borne and solvent-free coatings as well
as printing inks to stabilize the sinking tendency of inorganic pigment systems.
Recommended Levels:
The amount of additive (in purchased form) is based on the pigment:
Titanium dioxide: 2%-4%
Inorganic pigments: 5%-10
The above data are empirical and the optimum dosage should be determined
through a series of tests
INCORPORATION AND PROCESSING INSTRUCTIONS
In order to obtain the best performance, the additives should be added to the
abrasive before the pigments.
PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum
OUR SERVICE:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3. R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
OUR TEAM:
OUR COMPANY:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Ваше сообщение должно содержать от 20 до 3000 символов!
